The Springerle Series: Chocolate and Fondant Cookie Toppers


Guest Post by Fancy Flours Employee Lindsey K.

Welcome back to the third installment of our Springerle Series! This post will cover three mediums that you can use to top cookies in beautiful molded designs – modeling chocolate, fondant and marzipan. This is a super quick and easy way to take your cookies to the next level for wedding favors, birthdays, holiday gifts or just a sweet treat for a special someone.

If you missed our previous posts on how to craft with Springerle molds, see them here: Casting and Papercasting. As a quick review, Springerle cookies have been used to depict everything from biblical images to daily life since the 16th century. While the molds were originally used to make dense, cake-like cookies (see our recipe here!), they have advanced to be useful in crafting as well.

Our molds are made by House on the Hill of an heirloom quality wood and composite mix. Most of their images are casts of vintage molds and others are of their own design.

Before making our toppers for this tutorial, we pre-made cookies using our Gingerbread recipe. This recipe is fabulous for not only its taste, but for holding its shape. You could also use our No-Fail Sugar Cookie Recipe. We took note of the sizes of our molds and used cutters to make cookies just slightly larger.

We also pre-made our modeling chocolate, which is a surprisingly simple recipe from House on the Hill. You can also buy chocolate-flavored, white or colored fondant at most craft and baking stores. Or if you prefer to make your own, here’s a recipe from Allrecipes! And for you sweet almond lovers, you can simply use Marzipan from your grocery store.

I will show images using both the modeling chocolate (in brown) and fondant (in white). If you choose to use marzipan, you will follow the fondant instructions.

Ingredients/ Utensils

  • Modeling chocolate, fondant or marzipan
  • Cocoa powder (if using modeling chocolate)
  • Powdered sugar (if using fondant or marzipan)
  • Corn Syrup
  • Springerle mold
  • Cookies cut and baked in the shape of your mold
  • 2 Pastry brushes
  • Spatula
  • Small dish (for cocoa powder or powdered sugar)
  • Cooling rack (if using modeling chocolate)
  • Pastry prep mat (optional)
  • Luster or disco dust (optional)
  • Small food-safe paint brush (optional)


1. Workspace prep: On a flat surface, lay down your Pastry Prep Mat or wax paper to protect your surface and keep your area clean. Fill a small dish with your dusting powder (either cocoa or powdered sugar) and set near your pastry mat with a clean, dry pastry brush. Set your modeling chocolate, fondant or marzipan in a bowl near your space for easy access. Set out your cooling racks if using modeling chocolate.


2. Dip your pastry brush in cocoa (for chocolate) or powdered sugar (for fondant or marzipan) and dust your Springerle mold so it has an thick, even coating throughout the design. The pastry brush is great for this as it won’t clog up the deeper areas.

3. Lay your dusted mold face up on your pastry mat. Pull a ball of your topper medium from the bowl. It will need to be enough to fill the mold and a little extra to go over the edges.

Fancy tip: Your modeling chocolate should be the consistency of Play-Doh or perhaps even a touch harder. If it seems too soft or is sticking in your mold, flatten the ball into a pancake and refrigerate for 5-10 minutes.


4. Using your hands, press your medium into the mold. Be sure to push firmly to fill the deeper parts of the design.

5. When you feel the mold is adequately filled, flatten the back of your medium with a spatula. Press the topping to be quite thin unless you love a lot of chocolate or fondant on your cookies.🙂

Fancy tip: If your spatula is sticking to your chocolate or fondant, dust with cocoa or powdered sugar, respectively.

6. Turn your Springerle mold upside down with your medium still in it. Use gravity (and some light taps on the table) to release it. Release time may be longer for deeper molds.

7. Trim any extra with a knife or spatula and return to your bowl for re-use. You could also use a cookie cutter sized to your mold (we have many available here).


8. For modeling chocolate only: Set your finished topper on a cooling rack to dry until firm (approximately 2 hours). You can make these ahead of time and keep in an airtight container at room temperature for up to 1 month.


9. Repeat steps 2-8 for as many toppers as you need. Be sure to dust the mold before every press for all options.


10. To adhere the toppers to your cookies, brush a thin layer of corn syrup on the back of your topper and set on your cookie. Let dry for at least 10 minutes.

11. For a fancy touch, “paint” your topper with luster dust. You will not need to mix the luster dust with anything for this project. It should stick directly onto your medium. We used Super Green and Old Gold. See all our Luster and Disco Dust colors here!


Display in a cute container for decoration or wrap in a simple polypropylene bag with a ribbon to hand out to friends and family. To create the snow effect on our Pinewood Cabin cookie, I dusted it with powdered sugar instead of the cocoa.


Molds shown in this tutorial are Tree on Table, Monogram F, Pinewood Cabin and Snowman.


We would love to see your projects. What did you make your toppers for? Show us in the comments or send an email to!

The Springerle Series: Papercasting



By Fancy Flours Employee Lindsey K.

Welcome back for our second tutorial in the Springerle series! We’ll be covering how to make a papercast using our beautiful House on the Hill molds. Papercasts have so many uses. Put them on cards, use them as tags, wall décor, ornaments… or wrap honey jars to make a personalized gift as we’ll show you today.

Missed our first post where we made Paperclay ornaments? See it here! You’ll also get a quick history of what a Springerle is.

We used cotton linters from Arnold Grummer, who specializes in paper supplies. Their linters are non-toxic so you can feel safe going from cookies to papercasts and back! Grummer has pages of ideas and a papercasting video that is very helpful for our visual learners.

And now let’s make these adorable jar wrappers!


  • Cotton Linters (we found ours from Arnold Grummer)
  • Springerle Mold (see all our available molds here!)
  • Water
  • Blender
  • Medium Bowl
  • Fine Mesh Strainer
  • Sponge
  • Towel
  • Drying Rack
  • Ribbon
  • Hot Glue Gun
  • Black Tea Bags (optional)
  • Colored Tissue Paper (optional)
  • Glitter (optional)
  • Colored Pencils (optional)


1. Fill your blender about 3/4 full of water.

For the darkened ivory effect shown in our tutorial: Use hot water, add two tea bags and let them steep for 4 minutes. The linters will dry slightly darker using the tea method than they appear when wet.

For color: Add colored tissue paper after you put in your linters (step 2). Start with small strips and blend. Add more until your desired shade is reached. Only use the tissue paper since it has paper dyes. Do not use other colorants. You can also add glitter for some subtle sparkle at this stage.


2. Remove the tea bags if you used them. Put a handful of paper linters into the blender and purée until it becomes a pulp.

3. Place your mesh strainer into the bowl. Pour a “pancake” of pulp into the strainer using a continuous, circular pouring motion. Make the pancake as big as your design. This saves you from having to reshape after the fact.

Tip: If the pulp isn’t coming out easily, you can add more water to the blender and re-pour.


4. Prep your workspace by placing a towel down. Have the sponge and drying rack within arm’s reach.

5. Dump the pulp from the strainer into your open, flat hand. Lightly press the pulp to remove some of the water, but you still want it to be very wet at this point. After pressing, plop the pulp onto the mold so it covers the whole design. (No need to coat the mold with a release agent). If you need more pulp, simply place it back in the strainer and pour more onto it from the blender. We used the Bee Skep for our honey jars.

6. Using the sponge, press out as much water from the  pulp as you can.


7. Using a corner of the towel you’ve laid down, press the rest of the water out. Keep moving the towel to a dry spot as you press so that you can tell when most of the water has been extracted.

Tip: Make sure to press deeper parts of the design harder. For example, the bee’s abdomen. For particularly detailed spots, use your fingers to press the pulp into it.


8. “Deckle” the edges by placing your thumb along the edge of the design and pulling off the extra with your fingers or tweezers. This gives a fun, home-made look, but you can also use scissors after the mold is dry to create a clean edge.


9. Pick up the mold and turn it upside down. Gravity will be your aid. Lightly pull away all edges and carefully remove the cast.

Tip: If you’re unhappy with your cast, just toss it back in the blender and begin again!


10. Place your papercast on the drying rack and let dry 12-24 hours (depending on humidity). You can make as many casts as you have pulp in your blender by returning the poured water right back into it. The water will last 3-4 more handfuls of linters before needing to be replaced.


11. If you plan to color your casts, now is the time! After they’re dry, you can use acrylic paint, colored pencils or thin markers. We used colored pencils for this Cornucopia design.


12. Now back to our little bee! Gather your hot glue gun, honey jars, dried papercast and desired ribbon cut to the diameter of your jars. I put down aluminum foil and parchment paper to protect my work surface from the hot glue.


13. Using the hot glue gun, attach your papercast to the center of your ribbon.


14. Once that cools, wrap the ribbon and papercast around the jar and glue the two ends of the ribbon to each other.

15. Ta da! You’ve created a sweet personalized gift!


While I was at it, I made these cute napkin rings using the same method of attaching the cast to a ribbon.


Owner of House on the Hill, Connie Meisinger, created several other beautiful papercasts. Here they are for a bit of inspiration.

This slideshow requires JavaScript.

Slide 1: Pine Cone Card

Slide 2: These molds have retired, but we have a beautiful grape mold for your wine gifts in our Taste of Switzerland Set.

Slide 3: Gift tags of Fireworks, Pine Cone, Santafest and Snowman

Slide 4: Deep Santa Card

Slide 5: Bee made and colored with markers by our own Fancy Flours employee, Patty!


Show us what you’ve created! We would love to see your work either by email at or in the comments below.

The Springerle Series: Casting


Guest Post By Fancy Flours Employee Lindsey K.

Welcome to our first post in a series detailing all the wonderful things you can do with a Springerle mold! We’ll be jumping a little ahead in time by making Christmas ornaments, but you can use any design to decorate gifts or simply your home year round.

But what the heck is a Springerle mold? We’ll start with a brief history.

The most common form of pronunciation is spring-er-lee, however, the traditional form is shpring-er-luh. The molds were originally carved out of clay beginning as early as the 14th century in Germany, Bavaria, Switzerland and the Alsace area of France. Their biblical pictures were transferred to cookies and breads to educate those who couldn’t read or write. The molds soon changed to wood and metal mediums and the pictures came to represent everyday life – weddings, animals, holidays, etc. While generally used to mold dense, cake-like cookies, the molds have a number of uses in the crafting world.

We use molds from the wonderful crafters at House on the Hill. They’re made of a sturdy wood/resin composite and are casts of actual vintage designs. Check here for our full stock.

And now to the fun stuff! We’ll be casting our ornaments in Paperclay and Delight. Why these mediums instead of regular clay? They’re non-toxic! So you can feel safe using your mold for baking as well as crafting. This could even be a family project!



1. Knead your molding medium into a solid mass (we used Paperclay for this tutorial). Make sure there are no layers or your cast won’t come out cleanly. It helps to roll the dough rather than fold it. If your Paperclay seems dry, you can add a Tablespoon or less of water until it reaches the consistency you desire.

Tip: If you want your dough all one color, knead in a couple drops of acrylic paint to your desired shade.


2. Dust your work surface and rolling pin with cornstarch. We laid down our Tovolo Pastry Prep Mat before dusting. This makes for easier cleanup and your molding medium won’t stick to the table. Roll out the Paperclay as you would cookie dough.

Tip: Consider the depth of your design. Don’t roll your Paperclay thinner than the deepest part or you will lose the top details!


3. Use a pastry brush (or large new paint brush) to dust cornstarch into the mold. In a pinch, you can drop the cornstarch into the mold with your fingers alone, but the brush makes for even dusting and keeps your hands clean. Be sure to dust the mold with cornstarch before every pressing!

Featured mold is Sleigh with Covered Bridge.


4. Lay the mold onto the Paperclay and use even pressure to push all sides and the center into it. Again, consider your mold’s depth and press accordingly. This can take some practice, but if you don’t like the imprint simply ball the dough and begin again. It helps to press at table height rather than counter height.

Tip: Only want a piece of the design? Lay your mold face up and press the dough into the part that you wish to use. You can cut any excess with an exacto knife, spatula or dough cutter.



5. Lift the mold and cut out your design. If you have a cookie cutter to match your design, great! Otherwise an exacto knife, spatula or dough scraper will work just fine.

Tip: Only do one press at a time. If you do more than one, your dough will squish together and warp your design.


6. Press your lollipop stick or straw where you would like to tie the ribbon. Coffee stirrers create nice small, neat holes and can be found at office supply stores. You can cut away excess Paperclay before or after this step.


7. Use a spatula to remove your imprint and place on a mesh cooling rack to dry 12-24 hours.

Tip: After drying, you can smooth edges by sanding with a nail file or oval foam cushioned sanding pad.


8. If you’d like to paint your designs, now is the time! Acrylics work great. We chose to paint the Pine Cone design.

Tip: For an extra smooth finish, paint a thin layer of white and let dry before applying other colors.


9. Pull your ribbon through the designated hole, tie it and you’re done!


**Molds shown at top: Cozy Hearth, Partridge in Pear Tree, Angelica, Sleigh with Covered Bridge, Pine Cone.

We would love to see what you create! Send your photos to or attach them to a comment below.

Picnic Blanket Ice Cream Cake (with Ants!)

Guest Post by Fancy Flours Employee Lindsey G.

I have a tendency to go overboard for parties. It’s a habit all the women in my family share. Everything just has to have a special touch. Tell me to bring rolls to an event and I’ll butter them up, top them with cheese and herbs and display them on a nice plate. Oh cupcakes? Sure let me just find matching liners and picks for the theme of the evening. With summer coming up, I’m already thinking of fun ideas for our outdoor gatherings – beach, cabin, Fourth of July and, of course, your ordinary barbeque.

The only hitch with Montana summers is the temperature. Hundred degree days don’t make for happy baking. So when trying to think of a unique cake for a picnic or barbeque that wouldn’t require an oven, I immediately thought of ice cream cake! What could be simpler? You can either buy one from the store or make the quick and easy recipe illustrated below with any flavor you desire.

Ok, now you’re wondering, “What’s so unique about an ice cream cake?” Well, not much until you add a cute chocolate picnic blanket and ants on top! A couple bars of white chocolate, a Red Gingham Chocolate Transfer Sheet, decorative ants, a touch of frosting and half an hour are all it takes to make your cake something for the books. Even the kids can help stir, mash and spread so the whole family can create something fun and delicious.

Let’s get started!

Ice Cream Cake


  • 1 half gallon ice cream of your choice (I chose mint for the refreshing taste)
  • 1 small container of fudge or caramel topping
  • 25 Oreos
  • 5 TBSP unsalted butter


  • 8” square cake pan
  • Medium bowl, microwave safe
  • Potato masher
  • Spoon, knife and fork
  • Ice cream scoop


  1. Melt butter in one of your bowls.
  2. Add Oreo cookies to bowl. You can break them apart now for quicker mashing or leave them whole. You do not need to remove the frosting in the middle.Oreos-in-Bowl
  3. Mash Oreos and butter together with potato masher until it’s a mass of small crumbs.Oreo-Texture
  4. Dump Oreo mixture into your cake pan and press into the bottom with a fork to form the crust. Chill if not using immediately.Oreo-Crust-Finished
  5. Scoop and press ice cream into your cake pan until it is half full.Ice-Cream-Squishing-Layer-1
  6. Spoon fudge or caramel topping over pressed ice cream. The back of the spoon is handy for spreading.Fudge-Spreading
  7. Scoop and press ice cream into your cake pan until it reaches the top.
  8. Freeze until you’re ready to top!


Picnic Blanket Topper


  • 2 Large bars white baking chocolate
  • Red Gingham Chocolate Transfer Sheet (find it here)
  • Decorative ants (find them here)
  • Frosting (green)


  • Medium bowl, microwave safe
  • Wax paper or parchment paper
  • Spoon
  • Spatula or spreading knife
  • Black marker
  • Long knife (non-serrated)
  • Grass piping tip (I used Julia Usher’s)


  1. Place transfer sheet slippery side up on wax or parchment paper. Measure and draw lines with your marker for an 8” by 8” square section.Measuring-TransferMeasured-Transfer
  2. Flip transfer sheet over so chocolate side is up. Leave on flat surface or in a cookie sheet for easy transport.
  3. Melt chocolate in microwave in 30 second intervals until completely melted and about 115 degrees Fahrenheit. This will usually be less than 2 minutes.
  4. Pour melted chocolate into the measured section of the transfer sheet and lightly spread into a thin layer. It is ok to go over the lines.Spreading-Chocolate
  5. Cool melted chocolate and sheet in the refrigerator until solid – 10 to 15 minutes.
  6. Remove sheet from fridge and place on flat surface (or leave in cookie sheet). Use the knife to cut along your marked edges to square up the edges. Warming the knife under hot water will help create clean lines.Cutting-Chocolate
  7. Peel off the transfer sheet.
  8. Place your “blanket” on top of your ice cream cake and use frosting or dots of melted chocolate to attach your ants.
  9. Pipe an edge of “grass” and you’re done!Finished-Full


  • Make your ice cream cake while the melted chocolate cools over your transfer sheet to save 15 minutes.
  • In a big rush? Buy a pre-made ice cream cake and cut your transfer sheet to size. This could work for round cakes too!
  • Save some hassle by buying a pre-made Oreo cookie crust in the baking section of your grocery store.
  • Oops! If you crack the chocolate when cutting, leave the chocolate transfer sheet-side down and rub a warmed spoon over the crack until it melts together. Re-chill to solidify before placing on your cake.
  • You can store the cake safely in the freezer (ants and all)!

NEW Simple Syrups – Not Just For Cocktails

Bang Candy Company Flavored Syrups are made by hand in small batches with only the finest ingredients. They’re perfect for making refreshing sodas, delicious cocktails and adding a touch of pizzaz to virtually any recipe! Simple syrups are not just for cocktails, you can add them to ice cream, pancakes, cake and much more.

Made with REAL ingredients. 100% natural. Versatile & amazing!

Lavender Mint Syrup


This Lavender Mint Simple Syrup is like walking through a lawn of fresh mint and lavender, both soothing and exhilarating at once. The delicate old world bouquet of lavender blossoms paired with the sweet snap of fresh mint is nothing short of divine.

Ingredients: Water, Cane Sugar, Fresh Mint, Lavender Blossoms, Citric Acid.


Lavender Mint Recipes


Mint Lavender Mist

Pour syrup into flute glass and top with sparkling wine, adjust syrup to your own taste…Some like it sweeter than others!


Lavender Mint Julep

Muddle syrup and mint leaves in julep cup. Fill cup with crushed ice and add bourbon. Garnish with fresh mint.


Lavender Lift

Add syrup to soda and fill with ice.


Lavender Mint Melon Salad

Toss melon pieces with fresh mint and simple syrup. Serve chilled.

Hibiscus Orange Blossom Ginger Syrup


This Hibiscus Orange Blossom Ginger Syrup is so summery and floral but with a nice tart hibiscus bite. As with most of our syrups this goes very well in lemonade and tea but for a nice 5 o’clock pick-me-up try shaking up three tablespoons of syrup with the freshly squeezed juice of 1/2 a lime and a stiff measure of vodka, garnish with a twist of orange peel and serve up in a chilled martini glass!

Ingredients: Water, Cane Sugar, Hibiscus Flowers, Orange Blossom Water, Ginger, Citric Acid.


Hibiscus Orange Blossom Ginger Recipes


Hibiscus Bubbles

Pour Syrup into flute glass and top with sparkling wine.

Fancy Tip: Rim your glass with our Hibiscus Flower Crystals for extra flavor and pizazz!


Hibiscus Orange Blossom Ginger Sunrise 

Combine tequila and orange juice in a highball glass with ice. Add syrup and stir.

Fancy Tip: Rim your glass with our Hibiscus Flower Crystals for extra flavor and pizazz!


Hibiscus Bubbly Wonder

Combine the first 4 ingredients in a cocktail shaker and shake the living daylights out of it with a few cubes of ice for a minute or so, pour into a Champagne flute and top it off with the sparkling tipple of your fancy. Garnish with a twist and dance on through the night!

Fancy Tip: Rim your glass with our Hibiscus Flower Crystals for extra flavor and pizazz!


Hibiscus Ginger Fizz

Combine syrup and soda and fill with ice.


Moroccan Citrus Dessert

Select 3 different types of citrus from the market, I chose blood oranges, tangerines and grapefruit to add a bit of tang! remove the pith and peel with a knife. Slice the fruit laterally saving any juice run off and arrange artistically on a serving dish. Mix together the Hibiscus Orange Blossom Ginger Simple Syrup syrup with honey and the excess citrus juice and drizzle sparingly over the fruit. Sprinkle with a little cinnamon and scatter a fistful of toasted walnuts over the top and serve.


Hibiscus Orange Trifle

Mix rum and Hibiscus Orange Blossom Ginger Simple Syrup and set aside. Arrange in layers, starting with cake pieces. Brush the cake pieces with the rum-syrup mixture to saturate before adding a layer of orange segments and whipped cream. Repeat process to fill the dish. Makes one large or 4 individual sized trifles.

10 Treat Ideas To Welcome Spring


1. Little Blue Flower Cupcakes – These cupcakes are full of color and cheer, plus they are super easy! Just bake your favorite cupcake recipe in these Flower Foil Cupcake Liners and decorate with bright purple buttercream frosting topped with a Small Blue Royal Icing Flower!


2. Butterfly Wafer Paper Cookies – Make these cookies with our bestselling Butterfly Wafer Paper! Get the how-to HERE!


3. Daffodil Cupcakes – Nothing says Spring quite like a daffodil and these cupcakes! Just bake your favorite cupcake recipe in these Blue Gingham Cupcake Liners and decorate with orange buttercream frosting topped with a pretty Daffodil Icing!


4. Garden Party Cake & Cupcakes – Decorating idea from Make using our sweet Sugar Bees and Sugar Ladybugs!


5. DIY Spring Flower Sugar Cubes – Royal Icing Flower topped sugar cubes…drop one in and watch the flower float to the top as sugar cube melts. It will brighten your morning or put a smile on your guest’s face at your next brunch. Get the tutorial HERE.


6. Butterfly Cookies – Learn how to make and decorate butterfly cookies using the marbling and wet-on-wet icing techniques. Get the tutorial HERE.


7. Bright Daisy Treats – An easy way to brighten up any store bought treat is to top them with our Bright Sugar Daisies! Decorating idea from


8. 3D Flower Pot Cookies – Make using our new 3D Spring Flower Pot Cookie Cutter and our No Fail Sugar Cookie Recipe so that your dough does not spread and the baked pieces will still fit together nicely.


9. Hard Candy Lollipops With Edible Flowers – Update this old-fashioned favorite with edible flowers for a fresh spring treat. You can flavor to suit your taste , but you will need clear lollipops to showcase the flowers. Make sure you have an accurate candy thermometer for this recipe because the sugar temperature is critical! Get the tutorial HERE.


10. Flower Basket Cupcakes – Make Spring flower basket cupcakes topped with Royal Icing Pansies and Royal Icing Narcissus.  Just bake your favorite cupcake recipe in these Blue Gingham Cupcake Liners and wrap them in our adorable Basket Cupcake Wrappers!